StereoPhoto Maker Feedback

StereoPhoto Maker Feedback

　sRGB　　 Rob Caley　　 2023年3月15日(水) 22：28 　　　Mail

As far as I can tell, SPM does not offer any options for setting an image's colour space. Would it perhaps be possible to add an Embed sRGB profile (the one normally recommended when viewing digital images on computer screens or via projector) to the options within the image batch processing facility?
Many thanks for your consideration
Rob Caley

　Trouble Updating SPT for Mac to V. 6.30　　 Jeffrey Horwitz　　 2023年3月9日(木) 5：57 　　　Mail

I forgot to give this post a title before:

I downloaded SPM for Mac yesterday, and it seems to work fine. Today I tried to update it from V. 6.20 to V. 6.30 by following the instructions given to replace stphmkrpro_e.exe with the latest version. I went to the SPM for Mac page, and downloaded "StereoPhoto Maker Pro (64bit) Ver6.30a 2992KByte 21/Feb/2023". That gave me this file in my downloads folder: "stphmkrpro_e_630a.zip". When I opened it, it gave me this file: "stphmkrpro_e 2.exe". I then deleted the old "stphmkrpro_.e.exe" (which is 7.4 MB and was modified on Dec. 26, 2023) from the SPM folder, and replaced it with the "stphmkrpro_e 2.exe" file (which is 7.5 MB and was modified on Feb. 21, 2023). Finally, I renamed the "stphmkrpro_e 2.exe" file to "stphmkrpro_.e.exe" in the SPM folder. But when I go to my Applications folder in Finder and get "Info" from the SPM_Mac app, it still shows that it is Version 6.20, even though when I open the SPM folder, it shows the 7.5 MB file, modified on Feb.21, 2023 inside, and NOT the 7.4 MB file, modified on Dec. 26, 2023. So I don't understand why "Info" doesn't show Version 6.30. I don't know if I updated to 6.30 or not, but apparently not. What should I do. I haven't emptied the old file from the trash yet- could that be the problem?

　　　 Masuji Suto　　 2023年3月9日(木) 7：05 　　 HP　Mail

The version you are seeing is not the version of SPM, it is the version I entered in the Wineskin setup. Please ignore this version.
Please check the version of SPM in SPM Help menu.

　Trouble Updating SPT for Mac to V. 6.30　　 Jeffrey Horwitz　　 2023年3月7日(火) 14：42 　　　Mail

I forgot to give this post a title before:

I downloaded SPM for Mac yesterday, and it seems to work fine. Today I tried to update it from V. 6.20 to V. 6.30 by following the instructions given to replace stphmkrpro_e.exe with the latest version. I went to the SPM for Mac page, and downloaded "StereoPhoto Maker Pro (64bit) Ver6.30a 2992KByte 21/Feb/2023". That gave me this file in my downloads folder: "stphmkrpro_e_630a.zip". When I opened it, it gave me this file: "stphmkrpro_e 2.exe". I then deleted the old "stphmkrpro_.e.exe" (which is 7.4 MB and was modified on Dec. 26, 2023) from the SPM folder, and replaced it with the "stphmkrpro_e 2.exe" file (which is 7.5 MB and was modified on Feb. 21, 2023). Finally, I renamed the "stphmkrpro_e 2.exe" file to "stphmkrpro_.e.exe" in the SPM folder. But when I go to my Applications folder in Finder and get "Info" from the SPM_Mac app, it still shows that it is Version 6.20, even though when I open the SPM folder, it shows the 7.5 MB file, modified on Feb.21, 2023 inside, and NOT the 7.4 MB file, modified on Dec. 26, 2023. So I don't understand why "Info" doesn't show Version 6.30. I don't know if I updated to 6.30 or not, but apparently not. What should I do. I haven't emptied the old file from the trash yet- could that be the problem?

　　　 Jeffrey Horwitz　　 2023年3月5日(日) 10：24 　　　Mail

Is there a password to install Stereophoto Maker for Mac after you've put in the terminal command to disable Gatekeeper?

　　　 Masuji Suto　　 2023年3月5日(日) 10：45 　　 HP　Mail

No need a password!
Command in Terminal: sudo xattr -r -d com.apple.quarantine [Full Path SPM_Mac.app]
[Full Path SPM_Mac.app] is entered when SPM_Mac.app is dropped into the terminal.
Watch this video.
https://www.youtube.com/watch?v=oifIILVPrhc

　　　 Jeffrey Horwitz　　 2023年3月5日(日) 15：52 　　　Mail

Thank you.

　　　 Jeffrey Horwitz　　 2023年3月5日(日) 0：35 　　　Mail

Will the Mac Version of StereoPhoto Maker work on Ventura (13.0)?

　　　 Masuji Suto　　 2023年3月5日(日) 10：49 　　 HP　Mail

I have confirmed that it works with Ventura on my M1 Macbook Air.
However, You need to bypass Gatekeeper to get it to work.
Please see this page for more information.
http://stereo.jpn.org/eng/stphmkr/mac/index.html

　　　 Jeffrey Horwitz　　 2023年3月5日(日) 15：49 　　　Mail

Thank you Masuji.

　Export Lumepad lightfield　　 Michel Guiraud　　 2023年2月28日(火) 3：54 　　　Mail

First of all, a thousand thanks for your fantastic software which I have been following for years. I have the lumepad which transforms 2D photos into a lightfield image, unfortunately in this tablet there is no lightfield export function to a side by side or anaglyph format. Do you think this export is possible?
Thank you again and good luck

　　　 Bill Costa　　 2023年3月3日(金) 10：27 　　　Mail

My suggestion would be to post your question to the "3D Tablets & Phones" discussion list where there are more than a few people who own a Lume Pad. You'll find the group's home page here:

https://groups.io/g/3DTablets

The archives are open for searching. You'll need to subscribe to the group if you want to post a message.

　Looking Glass depth maps　　 Peter　　 2023年2月21日(火) 1：36 　　　Mail

In ver. 6.30, the feature to view a converted LKG+Depth map directly on the Looking Glass portrait no longer works. It only displays in current SPM window. This is when you use the Alt+Enter key combo. It also does not work through the menu.

This feature does work in ver. 6.28.

Is there something that changed? Is there something I'm missing?

　　　 Masuji Suto　　 2023年2月21日(火) 7：11 　　 HP　Mail

Ver. 6.30 significantly changes the use of multiple monitors.
https://stereo.jpn.org/eng/stphmkr/multimonitor/index.html

If "Looking Glass" is selected in the monitor settings as shown in the figure, the image will be displayed on the Looking Glass.

However, the conversion display from the quilt image has a bug and is no longer displayed directly on the Looking glass. This will be fixed later.

　　　 Masuji Suto　　 2023年2月21日(火) 10：25 　　 HP　Mail

A new version, Ver. 6.30a, which fixes a bug in the conversion display from quilt images to Looking Glass images, has just been released.

　adding text to customcard　　 Frank　　 2022年10月16日(日) 22：28 　　　Mail

For my Owl viewer I like to make custom cards 10 x 18 cm.
As I try to add some text , the text seems OK in the left window but as I try to save the cards, the text ends somewhwere else....
Altring the bottom marging also seems to change the font size ??
What am I doing wrong ?? Is there maybe a tutorial for text

　　　 Frank　　 2022年10月16日(日) 23：08 　　　Mail

here is what I get when I try to save....

　　　 Masuji Suto　　 2023年2月9日(木) 13：06 　　 HP　Mail

Sorry for the delay in response.
A new version (Ver. 6.29) has been released today that fixes this bug.
https://stereo.jpn.org/eng/index.html

　Mac OS Ventura　　 Bruce Whitehill　　 2023年1月15日(日) 19：17 　　　Mail

Before I starting downloading large file and figuring out what this is all about, will it work with Mac OS Ventura (since that is not listed in the compatible programs)?

　　　 Masuji Suto　　 2023年2月2日(木) 7：56 　　 HP　Mail

MacOS are prevented from executing downloaded files by a mechanism called "Gatekeeper".

To run the file, it must be downloaded on a Windows machine and brought to the Mac on a USB stick, or the information indicating the downloaded file must be removed from the file on the command line.

Please see this video.
https://www.youtube.com/watch?v=oifIILVPrhc

and this page.
https://stereo.jpn.org/eng/stphmkr/mac/index.html

I have confirmed that it works on the latest macOS Ventura.

　Trying to install SPM on M1 MacOS 13.1　　 Andrew Parke　　 2023年1月25日(水) 15：36 　　　Mail

No luck getting it to load using terminal. I'd like to not re-purchase CodeWeavers again. Not sure Wine runs on MacOS 13.1. What can I try now?

　　　 Ian Fleming　　 2023年1月29日(日) 4：55 　　

Use the terminal command preceding with sudo then your account/downloads/SPM.app

　　　 Masuji Suto　　 2023年2月2日(木) 7：52 　　 HP　Mail

MacOS are prevented from executing downloaded files by a mechanism called "Gatekeeper".

To run the file, it must be downloaded on a Windows machine and brought to the Mac on a USB stick, or the information indicating the downloaded file must be removed from the file on the command line.

Please see this video.
https://www.youtube.com/watch?v=oifIILVPrhc

and this page.
https://stereo.jpn.org/eng/stphmkr/mac/index.html

I have confirmed that it works on the latest macOS Ventura.

P7

Total 322　　[Administration]