StereoPhoto Maker Feedback

StereoPhoto Maker Feedback

　Full Editing with SPM　　 J. Clement　　 2021年4月22日(木) 22：11 　　　Mail

While SPM is invaluable for editing 3D photos, it is not really a full editor with the range of plug-ins and adjustments of a good reasonably priced editor like Paintshop Pro or Gimp... To edit scans of 3D photos I have to switch back and forth between my photo editor and SPM to view in 3D, find defects, and then correct them. This is very time consuming as I have to save before switching. Since photo editors do not support 3D it would be a great time saver to have some SPM features inside a standard photo editor.

This could be accomplished by having the most valuable features of SPM as Photoshop plug-ins which are accepted by most every good photo editor. The most valuable features that I use are: Auto alignment, 3D display, and Auto Color Adjustment. The Easy alignment is also occasionally used for scans which SPM mangles in Auto alignment. To be useful these should support both 16bit/color and 64 bit code. The 3D display would be most useful if it could get around the lag time for invocation, but that might be impossible in a plug-in. Yes, I realize there is a way to invoke an external editor but that is cumbersome, slow, and will not work with my 16bit color images. 16bit color is needed to edit Kodachrome scans and other extremely contrasty or dark images.

　　　 Masuji Suto　　 2021年5月6日(木) 18：50 　　

I have never used PhotoShop, nor do I plan to.

　Windows 10 warning　　 Daniel　　 2021年5月6日(木) 11：13 　　

Just downloaded latest versions and Windows gives me a warning because of unknown editor so I need to confirm I want to take the risk to execute.

I guess this cannot be avoided?

　　　 Masuji Suto　　 2021年5月6日(木) 18：48 　　

Maybe, It is possible to embed digital signatures in executable files to prevent warnings from appearing, but this requires paying a large fee to a certification company every year. and that company will not verify the software.
Since it is free software, I do not plan to spend money to get a digital signature.

　lenticular line pitch　　 Holger　　 2020年12月28日(月) 1：26 　　　Mail

Hi there,
for correct lenticular line pitch it is importend to calculate with decimal numbers.
For example: not only 60, but 60.24
Please change this in your program.
Thanks
Holger

　　　 Daniel　　 2021年4月11日(日) 17：42 　　

+1

I would appreciate this feature as well!
Thank you!
Daniel

　　　 Jane Kennedy　　 2021年4月8日(木) 23：41 　　　Mail

Hi there
This isn't an article as much rather a request for help. I am working on a MacBook Pro and don't want to run Windows on my mac.
Is there any other way of using your software or can you recommend a software I can use to work with 3D stills taken with the Fuji W3?

　bug in stereo5.js　　 Herb Weiner　　 2021年3月29日(月) 4：13 　　　Mail

If any of the JPG files have spaces in their names, clicking on the corresponding thumbnail image opens the first image rather than the correct image.

The problem is that after Param = Param.substring(1,Param.length); Param contains %20 in place of each of the spaces, so the following for loop does not find a match.

The solution is to add the following statement prior to the for loop: Param = Param.replace(/%20/g, " ");

　　　 Masuji Suto　　 2021年4月5日(月) 5：14 　　 HP　Mail

Thank you for pointing this out. I've never used filenames with spaces, so I wasn't aware of it.
Please take care of it by removing spaces from the file name, etc.

　Web | Make html stereo viewer　　 Theo van Dam　　 2021年3月31日(水) 0：02 　　　Mail

This is a great feature of SPM!
When selected filenames have upper-case letters one is offered a service to convert these to lower-case.
With "yes", the code of the index_m.html file contains the lower-case filenames for pictures and thumbnail pictures.
The files were renamed to lower-case but unfortunately the thumb files are not created in lower-case.
A webbrowser now cannot show the thumb images in the uploaded index_m file.
Thanks.

　　　 Masuji Suto　　 2021年4月5日(月) 5：06 　　 HP　Mail

Thank you for pointing this out. I hadn't noticed that.
The FTP software I use, "FFFTP", has a function that "converts all file names to lower case and uploads them", I always use it.
I think there is other software that can convert file names to lower case, so please use it.

　VR180保存メニュー　　 ROVER416T　　 2021年4月3日(土) 20：06 　　　Mail

今更ですが、Quest2が色々アレなんで改めてOculus Goで３Ｄ写真を見ようと思い、今使っているSPM Pro 6.05で通常のサイドバイサイドを変換しようと説明を見ましたが、私の6.05だとVR180保存メニューがこれなので全く分かりませんｗ
この保存メニューの説明ページっておありでしょうか？

　　　 Masuji Suto　　 2021年4月5日(月) 5：01 　　 HP　Mail

Oculus Goで３Ｄ写真をみるのであれば、「VRビューワー鑑賞用ファイル保存」メニューをお使い下さい
https://stereo.jpn.org/jpn/stphmkr/oculus/index.html

「VR180ファイルとして保存」は、VR180のファイルフォーマットで保存します。内容は、簡単で保存したいファイルが全天球エクイレクタングラーのどの部分かを指定します。
例えば、2000ｘ2000の画像をVR180として保存したいのであれば、FullPanoは4000x2000のエクイレクタングラーで、その真ん中に配置するのであれば、Top(0)Left(1000)Width(2000)Height(2000)となります。
VR180、対応していれば、その情報を元に適切に表示するはずです～
英語版のみですが、ここに解説を書きました～
https://stereo.jpn.org/eng/stphmkr/vr180/index.html

　Difficult to find page for reporting bugs　　 Herb Weiner　　 2021年3月29日(月) 6：38 　　　Mail

The StereoPhoto Maker help page should really have a link to this page to make it easier to find.

　Difficult to find page for reporting bugs　　 Herb Weiner　　 2021年3月29日(月) 4：24 　　　Mail

The StereoPhoto Maker help page should really have a link to this page to make it easier to find.

　　　 shen　　 2021年3月12日(金) 23：26 　　　Mail

Hello, teacher
https://github.com/MightyChaos/wsvd_test
This site Can it be used on Google Colab?
Hope you make a video tutorial
Further and better Use StereoPhoto Maker to make a three-dimensional movie

P15

Total 344　　[Administration]